AQUASAFE
Principle of operation
Tank disinfection module Aquasafe is ready for operation after filling the tank with water. Automatic switching on of the UV lamp activates it and ensures the continuity of UV disinfection during water consumption. In the absence of consumption, the lamp is automatically switched off, thus protecting the power supply system from discharging. It is automatically restarted when water consumption resumes. The applied control system allows for setting the appropriate time delay for starting the lamp, which protects it from frequent and short-term switching on. A signalling system consisting of three lights in different colours is installed at the test taps, which informs whether the water is suitable for direct consumption, after boiling, or whether it is necessary to wait for the lamp to heat up.
Construction of the disinfection module
The individual elements of the module installation are equipped with a drain system ensuring drainage of the installation in the winter. The doors have a key lock which protects the system against unauthorized interference. Both the installation and the housing of the disinfection module Aquasafe They are made of stainless steel with internal insulation. A special socket is led out of the housing to allow charging of batteries and there is also an inspection installed, which allows periodic replacement of the radiators without having to dismantle the lamp.
Module working time
The tank disinfection module is equipped with sealed gel batteries that are shock-resistant, do not emit gases and can operate in any position. Their greatest advantage is that their complete discharge, before recharging, does not cause a loss of operating parameters and does not shorten their service life.
Working time Aquasafe module with continuous UV disinfection for batteries with a capacity of 100 Ah, it normally exceeds 20 hours. If it is necessary to extend the operating time of the disinfection module, it can be equipped with batteries with increased capacity.
Operation and use
The tank disinfection module is a maintenance-free device - operation is limited only to fully charging the batteries before the tanker leaves for the water recipients. After turning on the tap Aquasafe module starts automatically.
From the moment water consumption begins, the PLC controller activates the UV lamp, controls the operation of the water disinfection system, signals the operating status and manages the energy saving system.
Benefits
- ensuring bacteriologically safe, drinkable water in all types of tankers and cisterns;
- reducing operating costs and the costs of purchasing chemicals for disinfecting tanks;
- significant acceleration of tanker departure time – readiness immediately after filling;
- high taste values of water (thanks to the elimination of tank disinfection);
- positive image effect for the Water Supplier – a modern, safe and customer-friendly solution for emergency water supplies;
- module development tailored to individual needs and requirements;
- long operation of the module on its own independent power supply (use of the energy saving function);
- remote monitoring (location, unauthorized access, water filling level, battery charge level) – optional;
- the ability to plan the process of replenishing water in tanks based on remote monitoring.
more information can be found in the pdf file.
AQUASAFE – tank disinfection module
Sale options
purchase
Ask for details
Contact a specialist dedicated to this product
Małgorzata Stefańska
tel. +48 538 306 407
e-mail: malgorzata.stefanska@proffico.com
Ewelina Wyganowska
tel. +48 532 781 270
e-mail: ewelina.wyganowska@proffico.com
References
The advantages of the offered device have already been appreciated by the following companies: MPWiK in Warsaw, Wodociągi Katowickie, MWiK in Bydgoszcz.
Case study
