Deep well pumps 4”
Destiny
Lowara GS series multistage deep well pumps are designed for pumping clean or sandy water (maximum amount of sand 150 g/m³). The pump design is adapted to a 4″ diameter well, the maximum total pump diameter is 99 mm. The GS series is available in a series of types with nominal flow values of 1, 2, 4, 6, 8, 12, 16 m³/h.
Features of GS submersible pumps
- the upper and lower bases are made of precision-cast stainless steel, which provides corrosion resistance, durability and a solid attachment to the engine,
- abrasion resistant construction,
- the hexagonal pump shaft guarantees effective impeller drive,
- a check valve integrated with the pump head installed at the outlet prevents water from flowing back and protects against water hammer, while protecting the diffusers and impeller,
- pumps in a separate design from the motor, can be coupled to 40S or L4C motors.
Application
– water collection from deep wells,
- increase in pressure,
– fire protection installations,
– water supply in industrial systems,
– filtration systems,
– dewatering in the mining industry,
– water treatment systems,
– reverse osmosis installations,
– groundwater extraction,
– sprinkler and irrigation systems.
Specification
– capacity: maximum 21 m³/h,
– lifting height: maximum 340 m,
– power supply: single-phase and three-phase 50 and 60 Hz,
– power: from 0.25 kW to 7.5 kW,
– pumped fluid temperature: up to 35ºC,
– maximum immersion depth: 300 m,
– water treatment systems,
– reverse osmosis installations,
– groundwater extraction,
– sprinkler and irrigation systems.
Deep well pumps 4”
(e-GS series)
Lowara Pumps
Deep-well pumps
for 6″ well
(Z6, ZN6)
Deep-well pumps
for wells 8", 10", 12"
(Z8, Z10, Z12)
Deep-well pumps
series
SCUBA
Ask for details
Contact a specialist dedicated to this product
Arkadiusz Witak
tel. +48 885 805 502
e-mail: arkadiusz.witak@proffico.com