Destiny
Multistage deep well pumps of the Z6 and ZN6 series are designed for pumping clean or slightly sandy water (maximum amount of sand 1050 g/m³). The pump design is adapted to a 6″ diameter well, the maximum pump diameter is 142 mm. The Z6 series is available in a series of types with nominal flow values of 12, 16, 22, 31, 46, 60 m³/h. The Z6 series pumps are made of AISI 304 stainless steel, while the ZN6 series are made of AISI 316 steel - thanks to this, the design is light, compact and resistant to corrosion in a chemically non-aggressive environment.
Features of GS submersible pumps
- construction, impellers and diffusers made of stainless steel,
- pressure head, lower support made of precision casting of stainless steel,
- built-in non-return valve,
- rotor with replaceable wear rings,
- polyurethane slide bearings installed on each step,
- high wear resistance and long-term stability of characteristics thanks to the use of tungsten carbide guide bearings, polyurethane floating rings and shaft covering sleeves,
- high-pressure version available (increased pump dimensions),
- replaceable clutch made to NEMA standard,
- ability to work in a horizontal position,
- supplied with L4C, L6W or L8W asynchronous motors.
Application
– water collection from deep wells,
- increase in pressure,
– sprinkler systems,
– irrigation systems,
– fire protection installations,
– groundwater extraction,
– drainage in mining,
– water supply in industrial installations,
– reverse osmosis,
– water treatment,
– filtration systems.
Specification
– Efficiency: maximum 78 m³/h,
– Lifting height: maximum 700 m,
– Power supply: single-phase and three-phase 50 Hz,
– Power: from 0.55 kW to 55 kW,
– Pumped fluid temperature: up to 60ºC,
– Maximum immersion depth: 350 m,
Deep well pumps 6″ (Z6, ZN6)
Lowara Pumps
Deep well pumps 4”
(e-GS series)
Deep-well pumps
for wells 8", 10", 12" (Z8, Z10, Z12)
Deep well pumps series
SCUBA
Ask for details
Contact a specialist dedicated to this product
Arkadiusz Witak
tel. +48 885 805 502
e-mail: arkadiusz.witak@proffico.com